HX2 Series

Overview of the HX2

The HX2 is a semi-instantaneous water heaters using available steam or heated water as the heating medium. Designed to the guidelines of TEMA, BOCA and IAPMO, these heaters can heat up to 150 GPM from 40 °F to 140 °F as standard, with higher capacities possible.

At the heart of the control system is the Control Master® panel with a digital PAC controller. The Control Master has an easy-to-navigate LCD panel for local monitoring and set point adjustment. It accepts remote set point changes and can re-transmit water temperature by analog signals or digital signals via standard Modbus® or BACnet® network communications protocols.

An electrically operated, fast-acting V-ball control valve is used to modulate the flow of the heating fluid. It has a 100:1 rangeability which gives excellent control at all flow rates. Capacitors integrated into the actuator housing close the valve in the event of loss of main power. Soft valve seats provide tight valve shut-off and prevent temperature rises at low load due to valve seat leakage.

Key Features and Benefits of the HX2

  • Safety features include a pressure/temperature (P/T) relief valve, solenoid-operated dump valve, high and low control panel alarm settings, and an automatic fail-closed steam inlet control valve.
  • Lightweight, compact design fits through standard doorways and freight elevators.
  • High accuracy temperature control of ±4 °F achieved.
  • Continuous forced re-circulation eliminates temperature stratification and ensures a uniform temperature distribution across all temperature sensors while also reducing scaling and sediment build-up on the tube bundles in the process.
  • ASME constructed and stamped tank assures safe operation to 150 PSIG.
  • All wetted parts on the heated side are lead-free and comply with NSF Standard 61 and the requirements of the U.S. Safe Drinking Water Act.

Flow, Pressure, and Temperature Ratings

  • Heated water recovery rates – 5 to 150 GPM
  • Steam supply pressure – Up to 100 PSIG
  • Cold water inlet pressure –  Up to150 PSIG
  • Heated water outlet temperature –  Up to 210 °F
  • Design rating  – ASME Boiler and Pressure Vessel | Code “U” stamped

Materials of Construction

The standard HX2 tank and couplings are 316L stainless steel passivated to ASTM A380 and A967. Piping is carbon steel, welded or threaded as appropriate. All units come with a flexible insulation jacket conforming to ASHRAE Std. 90.1, and the support stand and heating bundle head are powder coated for added durability.

A horizontal HX2 unit (not all piping shown or insulation jacket shown)

A horizontal HX2 unit (not all piping shown or insulation jacket shown)

Latest News & Projects

New Major Product Introduction

RECO USA, America’s leading supplier of water heating and storage equipment, is pleased to introduce the HX2® as RECO USA’s next generation of semi-instantaneous water heaters. Lighter, smaller, and more thermally efficient than ever before, these heaters provide up...

read more

New Purchasing Manager of RECO USA

RECO USA, America’s leading supplier of water heating and storage equipment, is pleased to announce William Langley has been promoted as our new Purchasing Manager effective September 23, 2019.  Will has been with RECO USA for 13 years, and for most of this time he...

read more

An Overview of Storage Tank Linings

Storage tanks are typically carbon steel with an internal lining to prevent internal corrosion. This is usually less expensive than using a higher-grade tank material, such as stainless steel or Cu-Ni, without a lining. Metal plating is seldom used as a lining...

read more

Commercial Sales

For more information, contact your local sales rep.
Click here to see the list of reps in your area call 803.794.3360

Industrial Sales

Phone: 803.794.3360
Contact Us
Fax: 803.791.3304